醋酸乙烯乳液聚合的最新进展

介绍了有关醋酸乙烯乳液聚合的新方法 ,包括在可反应性表面活性剂存在下的乳液聚合、无皂乳液聚合、种子乳液聚合、自持振荡性质的乳液聚合、辐射引发及氧化还原引发的乳液聚合等 .另外 ,对醋酸乙烯乳液的共聚改性和聚合工艺也作了详细阐述 .     

The sulfide electrode in bacterial studies

The applicability of a glass/Ag, Ag₂S (silver sulfide coated silver) electrode, which is capable of selectively detecting the H₂S fraction of total reduced inorganic sulfur (S_tot) concentration in biological systems is demonstrated. This electrode was used to monitor photosynthetic sulfide oxidation by Chlorobium phaeobacteroides. The electrode was resistant to Pfennig's medium and bacterial attack and after five months of use showed a potential drift within ±2 mV corresponding to ±13% maximum. The results obtained in a batch type experiment of growth of Chlorobium at different pH values suggest that Chlorobium cells preferentially take up the HS⁻ ion rather than H₂S.     

Effect of ferroelectric polarization on piezo/photocatalysis in Ag nanoparticles loaded 0.5(Ba0.7Ca0.3)TiO3–0.5Ba(Zr0.1Ti0.9)O3 composites towards the degradation of organic pollutants

A 0.5(Ba_0.7Ca_0.3)TiO₃–0.5Ba(Zr_0.1Ti_0.9)O₃ (BCT-BZT) ceramic was studied for photocatalysis and piezocatalysis effects using dye degradation (methylene blue, rhodamine B, and methyl orange) and bacterial (Escherichia coli) disinfection from aqueous solution. To examine the effect of ferroelectric polarization, BCT-BZT powder was poled using the corona poling technique. Same time, BCT-BZT was converted into Ag/BCT-BZT composites as Ag induced surface plasmon resonance effect during photocatalysis. Piezocatalysis performance was assessed for dyes mineralization under ultrasonication. There was a significant impact of silver nanoparticles on the photo/piezocatalysis performance of BCT-BZT. Similarly, electric poling has also played a positive role in improving the photo/piezocatalysis in view of various dye degradation. These samples also showed effective antibacterial performance.     

银氧化锡合金废料电解综合回收工艺研究

采用直流电解法和化学法回收银氧化锡(AgSnO2)合金废料中的银和锡。优化得到的电解银工艺参数为:槽电压1.5~3.0 V,电解周期为24 h,电解液中Ag⁺浓度为150~260 g/L,HNO3浓度为15~20 g/L,同极距120~140 mm,极板排布为六阴极五阳极间隔交替排列。一个周期银氧化锡废料电解银直收率接近95%,主体纯银粉在阴极析出。富含氧化锡的阳极泥和残极用硝酸浸出少量残余银,不溶渣还原熔炼回收锡,硝酸浸出的含银溶液中加入氢氧化钠调节pH值到10,沉淀得氧化银,500℃焙烧得到单质银。废料中的银和锡均得到有效回收。全流程银的回收率不低于99%。     

乙烯-乙酸乙烯酯共聚物Levapren 800硫化胶溶度参数的测定及应用

采用溶胀实验及计算机HSPiP软件对牌号为Levapren 800的乙烯-乙酸乙烯酯硫化胶的溶度参数进行了研究。结果表明,单一溶剂与混合溶剂都可用于Levapren 800硫化胶溶度参数的测定,用溶胀法测得其一维溶度参数(δt)为18.90~19.25(J/cm3)1/2。通过HSPiP软件测得Levapren 800硫化胶的δt为19.97(J/cm3)1/2;三维溶度参数的色散力、极性力和氢键力溶度参数分别为18.20,5.50,6.10(J/cm3)1/2。利用三维溶度参数可以预测Levapren 800硫化胶在标准实验油中的溶胀行为;相对能量差对预测聚合物在溶剂中的溶胀性能方面具有一定的应用价值。     

乙烯-乙酸乙烯酯共聚物/氢化丁腈橡胶共混物的相态结构和低温性能研究

采用熔融共混法制备乙烯-乙酸乙烯酯共聚物(EVM)/氢化丁腈橡胶(HNBR)共混物,研究其硫化特性、相态结构、动态力学性能、物理性能和低温拉伸性能。结果表明:当EVM/HNBR共混比为70/30时,EVM形成连续相,HNBR形成分散相;随着HNBR用量的增大,HNBR相态由分散相向连续相转变。HNBR的加入可以提高EVM的耐低温性能,当EVM/HNBR共混比为30/70时,共混物-40℃下的低温拉断伸长率可达300%左右。差示扫描量热分析表明,随着HNBR用量的增大,共混物玻璃化温度降低。     

叔碳酸乙烯酯改性VAE乳液的研究

在VAE乳液生产工艺中引入改性单体叔碳酸乙烯酯,通过调整改性单体的加入量、选择合适的乳化剂和保护胶体的品种和用量,生产出符合DBJ/T01-63-2002《外墙外保温用聚合物砂浆质量检验标准》并适合喷雾干燥生产可再分散乳胶粉的三元共聚乳液。     

Investigation of synergistic effect of nano sized Ag/TiO2 particles on antibacterial,physical and mechanical properties of UV-curable clear coatings by experimental design

The synergistic effect of nano titanium dioxide (10 and 30 nm) and nano silver (10 nm) as antibacterial agents were investigated on UV curable clear coating. Antibacterial and physical–mechanical properties of coating were optimized using experimental design in response surface method. Twenty different samples of nano Ag and nano TiO₂ were prepared in this method. Antibacterial properties on Gram-negative bacteria (Escherichia coli) were investigated. The results revealed that using equal amounts of two sizes of nano TiO₂ promote the antibacterial activity of nano Ag. So, the coating shows strong activity against E. coli. Physical–mechanical properties such as surface hardness, abrasion resistance, scratch resistance and gloss of the coating were evaluated. The results depicted appropriate physical–mechanical properties. Also, scanning electron microscope (SEM), atomic force microscope (AFM) and Fourier transform infrared (FT-IR) spectroscopy were used to study the effect of nano particles on coating properties.     

银掺杂介孔二氧化钛的制备及可见光催化性能

以表面活性剂十六烷基三甲基溴化铵(CTAB)为模板、钛酸四丁酯为钛源、硝酸银为掺杂离子前驱体,通过液晶模板辅助溶胶-凝胶法制备银掺杂介孔二氧化钛(Ag/MT),借助于X射线衍射、N2吸附-脱附、差热分析仪、X射线光电子能谱、紫外可见分光光度计、透射电子显微镜等对样品的结构进行了表征,以亚甲基蓝(MB)为目标降解物,探讨了合成产物的可见光催化性能。结果表明:银掺杂降低了介孔二氧化钛(MT)粒径和光生电子-空穴复合率,提高了比表面积和Ti 3+和羟基浓度,使得Ag/MT的光催化活性高于纯MT和P25,银掺杂减小TiO2带隙能,使其具有很高的可见光催化活性。最佳光催化条件为Ag/MT和MB的浓度分别为0.6g/L和1mg/L。